| # Apache Tomcat 6.0 |

Links Docs Home Config Ref. Home Top Level Elements Server Service Executors Executor Connectors HTTP AJP Containers Context Engine Host Cluster Nested Components Filter Global Resources Listeners Loader Manager Realm Resources Valve Cluster Elements Cluster Manager Channel Channel/Membership Channel/Sender Channel/Receiver Channel/Interceptor Valve Deployer ClusterListener Global Settings System properties | # Apache Tomcat Configuration Reference ## The Host Container
Table of Contents
Introduction Attributes Common Attributes Standard Implementation Nested Components Special Features Logging Access Logs Automatic Application Deployment Host Name Aliases Lifecycle Listeners Request Filters Single Sign On User Web Applications
Introduction
The Host element represents a virtual host, which is an association of a network name for a server (such as "www.mycompany.com" with the particular server on which Catalina is running. In order to be effective, this name must be registered in the Domain Name Service (DNS) server that manages the Internet domain you belong to - contact your Network Administrator for more information. In many cases, System Administrators wish to associate more than one network name (such as `www.mycompany.com` and `company.com`) with the same virtual host and applications. This can be accomplished using the Host Name Aliases feature discussed below. One or more Host elements are nested inside an Engine element. Inside the Host element, you can nest Context elements for the web applications associated with this virtual host. Exactly one of the Hosts associated with each Engine MUST have a name matching the `defaultHost` attribute of that Engine. The description below uses the variable name $CATALINA_BASE to refer the base directory against which most relative paths are resolved. If you have not configured Tomcat for multiple instances by setting a CATALINA_BASE directory, then $CATALINA_BASE will be set to the value of $CATALINA_HOME, the directory into which you have installed Tomcat.
Attributes
> Common Attributes
> > All implementations of Host support the following attributes:
> > Attribute | Description
> > --- | ---
> > `appBase` | The Application Base directory for this virtual host. This is the pathname of a directory that may contain web applications to be deployed on this virtual host. You may specify an absolute pathname, or a pathname that is relative to the `$CATALINA_BASE` directory. See Automatic Application Deployment for more information on automatic recognition and deployment of web applications. If not specified, the default of `webapps` will be used.
> > `autoDeploy` | This flag value indicates if Tomcat should check periodically for new or updated web applications while Tomcat is running. If true, Tomcat periodically checks the `appBase` and `$CATALINA_BASE/conf/[engine_name]/[host_name]` directories and deploys any new web applications or context XML descriptors found. Updated web applications or context XML descriptors will trigger a reload of the web application. The flag's value defaults to true. See Automatic Application Deployment for more information.
> > `backgroundProcessorDelay` | This value represents the delay in seconds between the invocation of the backgroundProcess method on this host and its child containers, including all contexts. Child containers will not be invoked if their delay value is not negative (which would mean they are using their own processing thread). Setting this to a positive value will cause a thread to be spawn. After waiting the specified amount of time, the thread will invoke the backgroundProcess method on this host and all its child containers. A host will use background processing to perform live web application deployment related tasks. If not specified, the default value for this attribute is -1, which means the host will rely on the background processing thread of its parent engine.
> > `className` | Java class name of the implementation to use. This class must implement the `org.apache.catalina.Host` interface. If not specified, the standard value (defined below) will be used.
> > `deployIgnore` | A regular expression defining paths to ignore when `autoDeploy` and `deployOnStartup` are set. This allows you to keep your configuration in a version control system, for example, and not deploy a .svn or CVS folder that happens to be in the `appBase`. This regular expression is relative to `appBase`. It is also anchored, meaning the match is performed against the entire file/directory name. So, `foo` matches only a file or directory named `foo` but not `foo.war`, `foobar`, or `myfooapp`. To match anything with "foo", you could use `.*foo.*`. See Automatic Application Deployment for more information.
> > `deployOnStartup` | This flag value indicates if web applications from this host should be automatically deployed when Tomcat starts. The flag's value defaults to true. See Automatic Application Deployment for more information.
> > `name` | Network name of this virtual host, as registered in your Domain Name Service server. Regardless of the case used to specify the hostname, Tomcat will convert it to lower case internally. One of the Hosts nested within an Engine MUST have a name that matches the `defaultHost` setting for that Engine. See Host Name Aliases for information on how to assign more than one network name to the same virtual host.
> Standard Implementation
> > The standard implementation of Host is org.apache.catalina.core.StandardHost. It supports the following additional attributes (in addition to the common attributes listed above):
> > Attribute | Description
> > --- | ---
> > `deployXML` | Set to `false` if you want to disable parsing the context XML descriptor embedded inside the application (located at `/META-INF/context.xml`). Security conscious environments should set this to `false` to prevent applications from interacting with the container's configuration. The administrator will then be responsible for providing an external context configuration file, and putting it in `$CATALINA_BASE/conf/[engine_name]/[host_name]`. The flag's value defaults to `true`.
> > `errorReportValveClass` | Java class name of the error reporting valve which will be used by this Host. The responsibility of this valve is to output error reports. Setting this property allows to customize the look of the error pages which will be generated by Tomcat. This class must implement the `org.apache.catalina.Valve` interface. If none is specified, the value `org.apache.catalina.valves.ErrorReportValve` will be used by default.
> > `unpackWARs` | Set to `true` if you want web applications that are placed in the `appBase` directory as web application archive (WAR) files to be unpacked into a corresponding disk directory structure, `false` to run such web applications directly from a WAR file. WAR files located outside of the Host's appBase will not be expanded. See Automatic Application Deployment for more information.
> > `workDir` | Pathname to a scratch directory to be used by applications for this Host. Each application will have its own sub directory with temporary read-write use. Configuring a Context workDir will override use of the Host workDir configuration. This directory will be made visible to servlets in the web application by a servlet context attribute (of type `java.io.File`) named `javax.servlet.context.tempdir` as described in the Servlet Specification. If not specified, a suitable directory underneath `$CATALINA_BASE/work` will be provided.
Nested Components
You can nest one or more Context elements inside this Host element, each representing a different web application associated with this virtual host. You can nest at most one instance of the following utility components by nesting a corresponding element inside your Host element: Realm - Configure a realm that will allow its database of users, and their associated roles, to be shared across all Contexts nested inside this Host (unless overridden by a Realm configuration at a lower level).
Special Features
> Logging
> A host is associated with the `org.apache.catalina.core.ContainerBase.[engine_name].[host_name]` log category. Note that the brackets are part of the name, don't omit them.
> Access Logs
> > When you run a web server, one of the output files normally generated is an access log, which generates one line of information for each request processed by the server, in a standard format. Catalina includes an optional Valve implementation that can create access logs in the same standard format created by web servers, or in any number of custom formats. You can ask Catalina to create an access log for all requests processed by an Engine, Host, or Context by nesting a Valve element like this:
> >     <Host name="localhost" ...>
> >       ...
> >       <Valve className="org.apache.catalina.valves.AccessLogValve"
> >              prefix="localhost_access_log." suffix=".txt"
> >              pattern="common"/>
> >       ...
> >     </Host>
> See Access Log Valve for more information on the configuration attributes that are supported.
> Automatic Application Deployment
> If you are using the standard Host implementation, the following actions take place automatically when Catalina is first started, if the `deployOnStartup` property is set to `true` (which is the default value): Any XML file in `$CATALINA_BASE/conf/[engine_name]/[host_name]` is assumed to be a context XML descriptor containing a Context element (and its associated sub-elements) for a single web application. The web applications associated with each of these context XML descriptor files will be deployed first. The `docBase` attribute of this `<Context>` element must only be set if the docBase is outside the Host's `appBase`. For web applications located inside the Host's `appBase`, the `docBase` will be the name of the XML file with ".xml" replaced with ".war" for a web application archive or the name of the XML file with ".xml" removed for a directory. The `path` attribute must not be set. The context path used will be a slash character ("/") followed by the name of the XML file (less the .xml extension). Multi-level context paths may be defined using #, e.g. `foo#bar.xml` for a context path of `/foo/bar`. The default web application that has a context path of `/` may be defined by using a file called `ROOT.xml`. Any web application archive file within the Host's `appBase` directory that has not already been deployed as a result of a context XML descriptor, does not have a corresponding directory of the same name (without the ".war" extension), and is not excluded by `deployIgnore` will be deployed next. The context path used will be a slash character ("/") followed by the web application archive name less the ".war" extension. The one exception to this rule is that a web application archive named "ROOT.war" will be deployed with a context path of `/`. Multi-level contexts may be defined by using #, e.g. use a WAR named `foo#bar.war` for a context path of `/foo/bar`. If the `unpackWARs` attribute is `true`, the web application archive file will be expanded to a directory of the same name (without the ".war" extension". Note: If you re-deploy an updated WAR file while Tomcat is stopped, be sure to delete the associated expanded directory before restarting Tomcat, so that the updated WAR file will be re-expanded when Tomcat restarts. Any web application archive file within the Hosts's `appBase` directory that does not have a corresponding context XML descriptor (with a ".xml" extension rather than a ".war" extension) in `$CATALINA_BASE/conf/[engine_name]/[host_name]` will be scanned to see if it contains a context XML descriptor (located at `/META-INF/context.xml`) and if one is found the descriptor will be copied to the `$CATALINA_BASE/conf/[engine_name]/[host_name]` directory and renamed. Finally, any sub-directory within the Host's `appBase` that has not already been deployed as a result of a context XML descriptor and is not excluded by `deployIgnore` will be deployed. The context path used will be a slash character ("/") followed by the directory name, unless the directory name is ROOT, in which case the context path will `/`. Multi-level contexts may be defined by using #, e.g. use a directory named `foo#bar` for a context path of `/foo/bar`. Any directory within the Hosts's `appBase` directory that does not have a corresponding context XML descriptor in `$CATALINA_BASE/conf/[engine_name]/[host_name]` will be scanned to see if it contains a context XML descriptor (located at `/META-INF/context.xml`) and if one is found the descriptor will be copied to `$CATALINA_BASE/conf/[engine_name]/[host_name]` and renamed. In addition to the automatic deployment that occurs at startup time, you can also request that new XML configuration files, WAR files, or sub-directories that are dropped in to the `appBase` (or `$CATALINA_BASE/conf/[engine_name]/[host_name]` in the case of an XML configuration file) directory while Tomcat is running will be automatically deployed, according to the rules described above. The auto deployer will also track web applications for the following changes: An update to the WEB-INF/web.xml file will trigger a reload of the web application Deleting a WAR file will trigger an undeploy of the application with the removal of any associated expanded directory, context file and work directory. Any current user sessions will not be persisted. Deleting a directory will trigger an undeploy of the application with the removal of any associated context file and work directory. Any current user sessions will not be persisted. If there is an associated WAR file, it will not be deleted and the application will be redeployed from the WAR file the next time the auto deployer checks for changes. Deleting a context file will trigger an undeploy of the application with the removal of any associated work directory. Any current user sessions will not be persisted. If there is an associated WAR file and/or directory, they will not be deleted and the application will be redeployed from the WAR file (or from directory if there is no WAR file) the next time the auto deployer checks for changes. Updating a WAR file will trigger an undeploy of the application with the removal of any associated expanded directory, context file and work directory. Any current user sessions will not be persisted. Updating a directory (not the directory contents) will trigger an undeploy of the application with the removal of any associated context file and work directory. Any current user sessions will not be persisted. The application will be redeployed the next time the auto deployer checks for changes. Updating a context file will trigger an undeploy of the application with the removal of any associated work directory. Any current user sessions will not be persisted. The application will be redeployed the next time the auto deployer checks for changes. When using automatic deployment, the `docBase` defined by an XML Context file should be outside of the `appBase` directory. If this is not the case, difficulties may be experienced deploying the web application or the application may be deployed twice. The `deployIgnore` attribute can be used to avoid this situation. Finally, note that if you are defining contexts explicitly in server.xml, you should probably turn off automatic application deployment or specify `deployIgnore` carefully. Otherwise, the web applications will each be deployed twice, and that may cause problems for the applications.
> Host Name Aliases
> > In many server environments, Network Administrators have configured more than one network name (in the Domain Name Service (DNS) server), that resolve to the IP address of the same server. Normally, each such network name would be configured as a separate Host element in `conf/server.xml`, each with its own set of web applications. However, in some circumstances, it is desirable that two or more network names should resolve to the same virtual host, running the same set of applications. A common use case for this scenario is a corporate web site, where it is desirable that users be able to utilize either `www.mycompany.com` or `company.com` to access exactly the same content and applications. This is accomplished by utilizing one or more Alias elements nested inside your Host element. For example:
> >     <Host name="www.mycompany.com" ...>
> >       ...
> >       <Alias>mycompany.com</Alias>
> >       ...
> >     </Host>
> In order for this strategy to be effective, all of the network names involved must be registered in your DNS server to resolve to the same computer that is running this instance of Catalina.
> Lifecycle Listeners
> > If you have implemented a Java object that needs to know when this Host is started or stopped, you can declare it by nesting a Listener element inside this element. The class name you specify must implement the `org.apache.catalina.LifecycleListener` interface, and it will be notified about the occurrence of the corresponding lifecycle events. Configuration of such a listener looks like this:
> >     <Host name="localhost" ...>
> >       ...
> >       <Listener className="com.mycompany.mypackage.MyListener" ... >
> >       ...
> >     </Host>
> Note that a Listener can have any number of additional properties that may be configured from this element. Attribute names are matched to corresponding JavaBean property names using the standard property method naming patterns.
> Request Filters
> > You can ask Catalina to check the IP address, or host name, on every incoming request directed to the surrounding Engine, Host, or Context element. The remote address or name will be checked against a configured list of "accept" and/or "deny" filters, which are defined using `java.util.regex` Regular Expression syntax. Requests that come from locations that are not accepted will be rejected with an HTTP "Forbidden" error. Example filter declarations:
> >     <Host name="localhost" ...>
> >       ...
> >       <Valve className="org.apache.catalina.valves.RemoteHostValve"
> >              allow=".*\.mycompany\.com|www\.yourcompany\.com"/>
> >       <Valve className="org.apache.catalina.valves.RemoteAddrValve"
> >              deny="192\.168\.1\.\d+"/>
> >       ...
> >     </Host>
> See Remote Address Filter and Remote Host Filter for more information about the configuration options that are supported.
> Single Sign On
> > In many environments, but particularly in portal environments, it is desireable to have a user challenged to authenticate themselves only once over a set of web applications deployed on a particular virtual host. This can be accomplished by nesting an element like this inside the Host element for this virtual host:
> >     <Host name="localhost" ...>
> >       ...
> >       <Valve className="org.apache.catalina.authenticator.SingleSignOn"/>
> >       ...
> >     </Host>
> The Single Sign On facility operates according to the following rules: All web applications configured for this virtual host must share the same Realm. In practice, that means you can nest the Realm element inside this Host element (or the surrounding Engine element), but not inside a Context element for one of the involved web applications. As long as the user accesses only unprotected resources in any of the web applications on this virtual host, they will not be challenged to authenticate themselves. As soon as the user accesses a protected resource in any web application associated with this virtual host, the user will be challenged to authenticate himself or herself, using the login method defined for the web application currently being accessed. Once authenticated, the roles associated with this user will be utilized for access control decisions across all of the associated web applications, without challenging the user to authenticate themselves to each application individually. As soon as the user logs out of one web application (for example, by invalidating the corresponding session if form based login is used), the user's sessions in all web applications will be invalidated. Any subsequent attempt to access a protected resource in any application will require the user to authenticate himself or herself again. The Single Sign On feature utilizes HTTP cookies to transmit a token that associates each request with the saved user identity, so it can only be utilized in client environments that support cookies.
> User Web Applications
> > Many web servers can automatically map a request URI starting with a tilde character ("~") and a username to a directory (commonly named `public_html`) in that user's home directory on the server. You can accomplish the same thing in Catalina by using a special Listener element like this (on a Unix system that uses the `/etc/passwd` file to identify valid users):
> >     <Host name="localhost" ...>
> >       ...
> >       <Listener className="org.apache.catalina.startup.UserConfig"
> >                 directoryName="public_html"
> >                 userClass="org.apache.catalina.startup.PasswdUserDatabase"/>
> >       ...
> >     </Host>
> > On a server where `/etc/passwd` is not in use, you can request Catalina to consider all directories found in a specified base directory (such as `c:\Homes` in this example) to be considered "user home" directories for the purposes of this directive:
> >     <Host name="localhost" ...>
> >       ...
> >       <Listener className="org.apache.catalina.startup.UserConfig"
> >                 directoryName="public_html"
> >                 homeBase=c:\Homes"
> >                 userClass="org.apache.catalina.startup.HomesUserDatabase"/>
> >       ...
> >     </Host>
> > If a user home directory has been set up for a user named `craigmcc`, then its contents will be visible from a client browser by making a request to a URL like:
> >     http://www.mycompany.com:8080/~craigmcc
> Successful use of this feature requires recognition of the following considerations: Each user web application will be deployed with characteristics established by the global and host level default context settings. It is legal to include more than one instance of this Listener element. This would only be useful, however, in circumstances where you wanted to configure more than one "homeBase" directory. The operating system username under which Catalina is executed MUST have read access to each user's web application directory, and all of its contents.
Copyright © 1999-2011, Apache Software Foundation