Package org.glassfish.grizzly

Interface Buffer

    • Method Detail

      • isComposite

        boolean isComposite()
        Returns:
        true if this Buffer represents a composite of individual Buffer instances.

      • prepend

        Buffer prepend​(Buffer header)
        Prepend data from header.position() to header.limit() to the current buffer. This will change the value returned by buffer()!
        Parameters:
        header - the data to prepend
        Returns:
        the new buffer
        Throws:
        IllegalArgumentException - if header.limit() - header.position() is greater than headerSize.

      • trim

        void trim()
        Trim the buffer by reducing capacity to position, if possible. May return without changing capacity. Also resets the position to 0, like flip().

      • shrink

        void shrink()
        Disposes the buffer part, outside [position, limit] interval if possible. May return without changing capacity. After shrink is called, position/limit/capacity values may have different values, than before, but still point to the same Buffer elements.

      • split

        Buffer split​(int splitPosition)
        Split up the buffer into two parts: [0..splitPosition) and [splitPosition, capacity). This Buffer will represent the first part: [0..splitPosition) and returned Buffer will represent the second part: [splitPosition, capacity). Splitting a buffer will reset the mark if the mark is greater than or equal to the splitPosition.
        Parameters:
        splitPosition - position of split.
        Returns:
        the Buffer, which represents split part [splitPosition, capacity)

      • allowBufferDispose

        boolean allowBufferDispose()

      • allowBufferDispose

        void allowBufferDispose​(boolean allowBufferDispose)

      • isDirect

        boolean isDirect()
        Tells whether or not this buffer is direct.
        Returns:
        true if, and only if, this buffer is direct

      • tryDispose

        boolean tryDispose()
        Try to dispose Buffer if it's allowed.
        Returns:
        true if successfully disposed

      • dispose

        void dispose()
        Notify the allocator that the space for this Buffer is no longer needed. All calls to methods on a Buffer will fail after a call to dispose().

      • underlying

        Object underlying()
        Return the underlying buffer
        Returns:
        the underlying buffer

      • capacity

        int capacity()
        Returns this buffer's capacity.
        Returns:
        The capacity of this buffer

      • position

        int position()
        Returns this buffer's position.
        Returns:
        The position of this buffer

      • position

        Buffer position​(int newPosition)
        Sets this buffer's position. If the mark is defined and larger than the new position then it is discarded.
        Parameters:
        newPosition - The new position value; must be non-negative and no larger than the current limit
        Returns:
        This buffer
        Throws:
        IllegalArgumentException - If the preconditions on newPosition do not hold

      • limit

        int limit()
        Returns this buffer's limit.
        Returns:
        The limit of this buffer

      • limit

        Buffer limit​(int newLimit)
        Sets this buffer's limit. If the position is larger than the new limit then it is set to the new limit. If the mark is defined and larger than the new limit then it is discarded.
        Parameters:
        newLimit - The new limit value; must be non-negative and no larger than this buffer's capacity
        Returns:
        This buffer
        Throws:
        IllegalArgumentException - If the preconditions on newLimit do not hold

      • mark

        Buffer mark()
        Sets this buffer's mark at its position.
        Returns:
        This buffer

      • reset

        Buffer reset()
        Resets this buffer's position to the previously-marked position.

        Invoking this method neither changes nor discards the mark's value.

        Returns:
        This buffer
        Throws:
        InvalidMarkException - If the mark has not been set

      • clear

        Buffer clear()
        Clears this buffer. The position is set to zero, the limit is set to the capacity, and the mark is discarded.

        Invoke this method before using a sequence of channel-read or put operations to fill this buffer. For example: 

         buf.clear(); // Prepare buffer for reading
 in.read(buf); // Read data

        This method does not actually erase the data in the buffer, but it is named as if it did because it will most often be used in situations in which that might as well be the case.

        Returns:
        This buffer

      • flip

        Buffer flip()
        Flips this buffer. The limit is set to the current position and then the position is set to zero. If the mark is defined then it is discarded.

        After a sequence of channel-read or put operations, invoke this method to prepare for a sequence of channel-write or relative get operations. For example: 

         buf.put(magic); // Prepend header
 in.read(buf); // Read data into rest of buffer
 buf.flip(); // Flip buffer
 out.write(buf); // Write header + data to channel

        This method is often used in conjunction with the compact method when transferring data from one place to another.

        Returns:
        This buffer

      • rewind

        Buffer rewind()
        Rewinds this buffer. The position is set to zero and the mark is discarded.

        Invoke this method before a sequence of channel-write or get operations, assuming that the limit has already been set appropriately. For example: 

         out.write(buf); // Write remaining data
 buf.rewind(); // Rewind buffer
 buf.get(array); // Copy data into array
        Returns:
        This buffer

      • remaining

        int remaining()
        Returns the number of elements between the current position and the limit.
        Specified by:
        remaining in interface WritableMessage
        Returns:
        The number of elements remaining in this buffer

      • hasRemaining

        boolean hasRemaining()
        Tells whether there are any elements between the current position and the limit.
        Specified by:
        hasRemaining in interface WritableMessage
        Returns:
        true if, and only if, there is at least one element remaining in this buffer

      • isReadOnly

        boolean isReadOnly()
        Tells whether or not this buffer is read-only.
        Returns:
        true if, and only if, this buffer is read-only

      • slice

        Buffer slice()
        Creates a new Buffer whose content is a shared subsequence of this buffer's content.

        The content of the new buffer will start at this buffer's current position. Changes to this buffer's content will be visible in the new buffer, and vice versa; the two buffers' position, limit, and mark values will be independent.

        The new buffer's position will be zero, its capacity and its limit will be the number of bytes remaining in this buffer, and its mark will be undefined. The new buffer will be direct if, and only if, this buffer is direct, and it will be read-only if, and only if, this buffer is read-only.

        Returns:
        The new Buffer

      • slice

        Buffer slice​(int position,
             int limit)
        Creates a new Buffer whose content is a shared subsequence of this buffer's content.

        The content of the new buffer will start at passed position and end at passed limit. Changes to this buffer's content will be visible in the new buffer, and vice versa; the two buffer's position, limit, and mark values will be independent.

        The new buffer's position will be zero, its capacity and its limit will be the number of bytes remaining in this buffer, and its mark will be undefined. The new buffer will be direct if, and only if, this buffer is direct, and it will be read-only if, and only if, this buffer is read-only.

        Parameters:
        position - the position of the start of the slice
        limit - the limit to take the slice up to
        Returns:
        The new Buffer

      • duplicate

        Buffer duplicate()
        Creates a new Buffer that shares this buffer's content.

        The content of the new buffer will be that of this buffer. Changes to this buffer's content will be visible in the new buffer, and vice versa; the two buffer's position, limit, and mark values will be independent.

        The new buffer's capacity, limit, position, and mark values will be identical to those of this buffer. The new buffer will be direct if, and only if, this buffer is direct, and it will be read-only if, and only if, this buffer is read-only.

        Returns:
        The new Buffer

      • asReadOnlyBuffer

        Buffer asReadOnlyBuffer()
        Creates a new, read-only Buffer that shares this buffer's content.

        The content of the new buffer will be that of this buffer. Changes to this buffer's content will be visible in the new buffer; the new buffer itself, however, will be read-only and will not allow the shared content to be modified. The two buffer's position, limit, and mark values will be independent.

        The new buffer's capacity, limit, position, and mark values will be identical to those of this buffer.

        If this buffer is itself read-only then this method behaves in exactly the same way as the duplicate method.

        Returns:
        The new, read-only Buffer

      • get

        byte get()
        Relative get method. Reads the byte at this buffer's current position, and then increments the position.
        Returns:
        The byte at the buffer's current position
        Throws:
        BufferUnderflowException - If the buffer's current position is not smaller than its limit

      • put

        Buffer put​(byte b)
        Relative put method  (optional operation).

        Writes the given byte into this buffer at the current position, and then increments the position.

        Parameters:
        b - The byte to be written
        Returns:
        This buffer
        Throws:
        BufferOverflowException - If this buffer's current position is not smaller than its limit
        ReadOnlyBufferException - If this buffer is read-only

      • get

        byte get​(int index)
        Absolute get method. Reads the byte at the given index.
        Parameters:
        index - The index from which the byte will be read
        Returns:
        The byte at the given index
        Throws:
        IndexOutOfBoundsException - If index is negative or not smaller than the buffer's limit

      • put

        Buffer put​(int index,
           byte b)
        Absolute put method  (optional operation).

        Writes the given byte into this buffer at the given index.

        Parameters:
        index - The index at which the byte will be written
        b - The byte value to be written
        Returns:
        This buffer
        Throws:
        IndexOutOfBoundsException - If index is negative or not smaller than the buffer's limit
        ReadOnlyBufferException - If this buffer is read-only

      • get

        Buffer get​(byte[] dst)
        Relative bulk get method.

        This method transfers bytes from this buffer into the given destination array. An invocation of this method of the form src.get(a) behaves in exactly the same way as the invocation 

         src.get(a, 0, a.length)
        Parameters:
        dst - destination array to put the bytes into
        Returns:
        This buffer
        Throws:
        BufferUnderflowException - If there are fewer than length bytes remaining in this buffer

      • get

        Buffer get​(byte[] dst,
           int offset,
           int length)
        Relative bulk get method.

        This method transfers bytes from this buffer into the given destination array. If there are fewer bytes remaining in the buffer than are required to satisfy the request, that is, if length > remaining(), then no bytes are transferred and a BufferUnderflowException is thrown.

        Otherwise, this method copies length bytes from this buffer into the given array, starting at the current position of this buffer and at the given offset in the array. The position of this buffer is then incremented by length.

        In other words, an invocation of this method of the form src.get(dst, off, len) has exactly the same effect as the loop 

         for (int i = off; i < off + len; i++)
     dst[i] = src.get();
        except that it first checks that there are sufficient bytes in this buffer and it is potentially much more efficient.
        Parameters:
        dst - The array into which bytes are to be written
        offset - The offset within the array of the first byte to be written; must be non-negative and no larger than dst.length
        length - The maximum number of bytes to be written to the given array; must be non-negative and no larger than dst.length - offset
        Returns:
        This buffer
        Throws:
        BufferUnderflowException - If there are fewer than length bytes remaining in this buffer
        IndexOutOfBoundsException - If the preconditions on the offset and length parameters do not hold

      • get

        Buffer get​(ByteBuffer dst)
        Relative bulk get method.

        This method transfers bytes from this buffer into the given destination ByteBuffer. An invocation of this method of the form src.get(a) behaves in exactly the same way as the invocation 

         src.get(a, 0, a.remaining())
        Parameters:
        dst - destination ByteBuffer to put the data into
        Returns:
        This buffer
        Throws:
        BufferUnderflowException - If there are fewer than length bytes remaining in this buffer

      • get

        Buffer get​(ByteBuffer dst,
           int offset,
           int length)
        Relative bulk get method.

        This method transfers bytes from this buffer into the given destination ByteBuffer. If there are fewer bytes remaining in the buffer than are required to satisfy the request, that is, if length > remaining(), then no bytes are transferred and a BufferUnderflowException is thrown.

        Otherwise, this method copies length bytes from this buffer into the given ByteBuffer, starting at the current position of this buffer and at the given offset in the ByteBuffer. The position of this buffer is then incremented by length.

        In other words, an invocation of this method of the form src.get(dst, off, len) has exactly the same effect as the loop 

         for (int i = off; i < off + len; i++)
     dst.put(i) = src.get();
        except that it first checks that there are sufficient bytes in this buffer and it is potentially much more efficient.
        Parameters:
        dst - The ByteBuffer into which bytes are to be written
        offset - The offset within the ByteBuffer of the first byte to be written; must be non-negative and no larger than dst.remaining()
        length - The maximum number of bytes to be written to the given array; must be non-negative and no larger than dst.remaining() - offset
        Returns:
        This buffer
        Throws:
        BufferUnderflowException - If there are fewer than length bytes remaining in this buffer
        IndexOutOfBoundsException - If the preconditions on the offset and length parameters do not hold

      • put

        Buffer put​(Buffer src)
        Relative bulk put method  (optional operation).

        This method transfers the bytes remaining in the given source buffer into this buffer. If there are more bytes remaining in the source buffer than in this buffer, that is, if src.remaining() > remaining(), then no bytes are transferred and a BufferOverflowException is thrown.

        Otherwise, this method copies n = src.remaining() bytes from the given buffer into this buffer, starting at each buffer's current position. The positions of both buffers are then incremented by n.

        In other words, an invocation of this method of the form dst.put(src) has exactly the same effect as the loop 

         while (src.hasRemaining())
     dst.put(src.get());
        except that it first checks that there is sufficient space in this buffer and it is potentially much more efficient.
        Parameters:
        src - The source buffer from which bytes are to be read; must not be this buffer
        Returns:
        This buffer
        Throws:
        BufferOverflowException - If there is insufficient space in this buffer for the remaining bytes in the source buffer
        IllegalArgumentException - If the source buffer is this buffer
        ReadOnlyBufferException - If this buffer is read-only

      • put

        Buffer put​(Buffer src,
           int position,
           int length)
        Relative bulk put method  (optional operation).

        This method transfers the "length" bytes from the given source buffer into this buffer. If this buffer has less bytes remaining than length, that is, if length > remaining(), then no bytes are transferred and a BufferOverflowException is thrown.

        Otherwise, this method copies n = length bytes from the given position in the source buffer into this buffer, starting from the current buffer position. The positions of this buffer is then incremented by length.

        In other words, an invocation of this method of the form dst.put(src, position, length) has exactly the same effect as the loop 

         for (int i = 0; i < length; i++)
     dst.put(src.get(i + position));
        except that it first checks that there is sufficient space in this buffer and it is potentially much more efficient.
        Parameters:
        src - The source buffer from which bytes are to be read; must not be this buffer
        position - starting position in the source buffer
        length - number of bytes to be copied
        Returns:
        This buffer
        Throws:
        BufferOverflowException - If there is insufficient space in this buffer for the remaining bytes in the source buffer
        IllegalArgumentException - If the source buffer is this buffer
        ReadOnlyBufferException - If this buffer is read-only

      • put

        Buffer put​(ByteBuffer src)
        Relative bulk put method  (optional operation).

        This method transfers the bytes remaining in the given source buffer into this buffer. If there are more bytes remaining in the source buffer than in this buffer, that is, if src.remaining() > remaining(), then no bytes are transferred and a BufferOverflowException is thrown.

        Otherwise, this method copies n = src.remaining() bytes from the given buffer into this buffer, starting at each buffer's current position. The positions of both buffers are then incremented by n.

        In other words, an invocation of this method of the form dst.put(src) has exactly the same effect as the loop 

         while (src.hasRemaining())
     dst.put(src.get());
        except that it first checks that there is sufficient space in this buffer and it is potentially much more efficient.
        Parameters:
        src - The source buffer from which bytes are to be read; must not be this buffer
        Returns:
        This buffer
        Throws:
        BufferOverflowException - If there is insufficient space in this buffer for the remaining bytes in the source buffer
        IllegalArgumentException - If the source buffer is this buffer
        ReadOnlyBufferException - If this buffer is read-only

      • put

        Buffer put​(ByteBuffer src,
           int position,
           int length)
        Relative bulk put method  (optional operation).

        This method transfers the "length" bytes from the given source buffer into this buffer. If this buffer has less bytes remaining than length, that is, if length > remaining(), then no bytes are transferred and a BufferOverflowException is thrown.

        Otherwise, this method copies n = length bytes from the given position in the source buffer into this buffer, starting from the current buffer position. The positions of this buffer is then incremented by length.

        In other words, an invocation of this method of the form dst.put(src, position, length) has exactly the same effect as the loop 

         for (int i = 0; i < length; i++)
     dst.put(src.get(i + position));
        except that it first checks that there is sufficient space in this buffer and it is potentially much more efficient.
        Parameters:
        src - The source buffer from which bytes are to be read; must not be this buffer
        position - starting position in the source buffer
        length - number of bytes to be copied
        Returns:
        This buffer
        Throws:
        BufferOverflowException - If there is insufficient space in this buffer for the remaining bytes in the source buffer
        IllegalArgumentException - If the source buffer is this buffer
        ReadOnlyBufferException - If this buffer is read-only

      • put

        Buffer put​(byte[] src)
        Relative bulk put method  (optional operation).

        This method transfers the entire content of the given source byte array into this buffer. An invocation of this method of the form dst.put(a) behaves in exactly the same way as the invocation 

         dst.put(a, 0, a.length)
        Parameters:
        src - source of bytes to put into the Buffer
        Returns:
        This buffer
        Throws:
        BufferOverflowException - If there is insufficient space in this buffer
        ReadOnlyBufferException - If this buffer is read-only

      • put

        Buffer put​(byte[] src,
           int offset,
           int length)
        Relative bulk put method  (optional operation).

        This method transfers bytes into this buffer from the given source array. If there are more bytes to be copied from the array than remain in this buffer, that is, if length > remaining(), then no bytes are transferred and a BufferOverflowException is thrown.

        Otherwise, this method copies length bytes from the given array into this buffer, starting at the given offset in the array and at the current position of this buffer. The position of this buffer is then incremented by length.

        In other words, an invocation of this method of the form dst.put(src, off, len) has exactly the same effect as the loop 

         for (int i = off; i < off + len; i++)
     dst.put(a[i]);
        except that it first checks that there is sufficient space in this buffer and it is potentially much more efficient.
        Parameters:
        src - The array from which bytes are to be read
        offset - The offset within the array of the first byte to be read; must be non-negative and no larger than array.length
        length - The number of bytes to be read from the given array; must be non-negative and no larger than array.length - offset
        Returns:
        This buffer
        Throws:
        BufferOverflowException - If there is insufficient space in this buffer
        IndexOutOfBoundsException - If the preconditions on the offset and length parameters do not hold
        ReadOnlyBufferException - If this buffer is read-only

      • put8BitString

        Buffer put8BitString​(String s)
        Relative bulk put method  (optional operation).

        This method transfers bytes into this buffer from the given 8-bit source String. If the source String.length() is bigger than this buffer's remaining, that is, if length() > remaining(), then no bytes are transferred and a BufferOverflowException is thrown.

        Otherwise, this method copies length bytes from the given String into this buffer.

        In other words, an invocation of this method of the form dst.put8BitString(src) has exactly the same effect as the loop 

         for (int i = 0; i < src.length(); i++)
     dst.put((byte) src.charAt(i));
        except that it first checks that there is sufficient space in this buffer and it is potentially much more efficient.
        Parameters:
        s - The String from which bytes are to be read
        Returns:
        This buffer
        Throws:
        BufferOverflowException - If there is insufficient space in this buffer
        ReadOnlyBufferException - If this buffer is read-only

      • compact

        Buffer compact()
        Compacts this buffer  (optional operation).

        The bytes between the buffer's current position and its limit, if any, are copied to the beginning of the buffer. That is, the byte at index p = position() is copied to index zero, the byte at index p + 1 is copied to index one, and so forth until the byte at index limit() - 1 is copied to index n = limit() - 1 - p. The buffer's position is then set to n+1 and its limit is set to its capacity. The mark, if defined, is discarded.

        The buffer's position is set to the number of bytes copied, rather than to zero, so that an invocation of this method can be followed immediately by an invocation of another relative put method.

        Invoke this method after writing data from a buffer in case the write was incomplete. The following loop, for example, copies bytes from one channel to another via the buffer buf: 

         buf.clear(); // Prepare buffer for use
 for (;;) {
     if (in.read(buf) < 0 && !buf.hasRemaining())
         break; // No more bytes to transfer
     buf.flip();
     out.write(buf);
     buf.compact(); // In case of partial write
 }
        Returns:
        This buffer
        Throws:
        ReadOnlyBufferException - If this buffer is read-only

      • order

        ByteOrder order()
        Retrieves this buffer's byte order.

        The byte order is used when reading or writing multibyte values, and when creating buffers that are views of this Buffer. The order of a newly-created Buffer is always BIG_ENDIAN.

        Returns:
        This buffer's byte order

      • getChar

        char getChar()
        Relative get method for reading a char value.

        Reads the next two bytes at this buffer's current position, composing them into a char value according to the current byte order, and then increments the position by two.

        Returns:
        The char value at the buffer's current position
        Throws:
        BufferUnderflowException - If there are fewer than two bytes remaining in this buffer

      • putChar

        Buffer putChar​(char value)
        Relative put method for writing a char value  (optional operation).

        Writes two bytes containing the given char value, in the current byte order, into this buffer at the current position, and then increments the position by two.

        Parameters:
        value - The char value to be written
        Returns:
        This buffer
        Throws:
        BufferOverflowException - If there are fewer than two bytes remaining in this buffer
        ReadOnlyBufferException - If this buffer is read-only

      • getChar

        char getChar​(int index)
        Absolute get method for reading a char value.

        Reads two bytes at the given index, composing them into a char value according to the current byte order.

        Parameters:
        index - The index from which the bytes will be read
        Returns:
        The char value at the given index
        Throws:
        IndexOutOfBoundsException - If index is negative or not smaller than the buffer's limit, minus one

      • putChar

        Buffer putChar​(int index,
               char value)
        Absolute put method for writing a char value  (optional operation).

        Writes two bytes containing the given char value, in the current byte order, into this buffer at the given index.

        Parameters:
        index - The index at which the bytes will be written
        value - The char value to be written
        Returns:
        This buffer
        Throws:
        IndexOutOfBoundsException - If index is negative or not smaller than the buffer's limit, minus one
        ReadOnlyBufferException - If this buffer is read-only

      • getShort

        short getShort()
        Relative get method for reading a short value.

        Reads the next two bytes at this buffer's current position, composing them into a short value according to the current byte order, and then increments the position by two.

        Returns:
        The short value at the buffer's current position
        Throws:
        BufferUnderflowException - If there are fewer than two bytes remaining in this buffer

      • putShort

        Buffer putShort​(short value)
        Relative put method for writing a short value  (optional operation).

        Writes two bytes containing the given short value, in the current byte order, into this buffer at the current position, and then increments the position by two.

        Parameters:
        value - The short value to be written
        Returns:
        This buffer
        Throws:
        BufferOverflowException - If there are fewer than two bytes remaining in this buffer
        ReadOnlyBufferException - If this buffer is read-only

      • getShort

        short getShort​(int index)
        Absolute get method for reading a short value.

        Reads two bytes at the given index, composing them into a short value according to the current byte order.

        Parameters:
        index - The index from which the bytes will be read
        Returns:
        The short value at the given index
        Throws:
        IndexOutOfBoundsException - If index is negative or not smaller than the buffer's limit, minus one

      • putShort

        Buffer putShort​(int index,
                short value)
        Absolute put method for writing a short value  (optional operation).

        Writes two bytes containing the given short value, in the current byte order, into this buffer at the given index.

        Parameters:
        index - The index at which the bytes will be written
        value - The short value to be written
        Returns:
        This buffer
        Throws:
        IndexOutOfBoundsException - If index is negative or not smaller than the buffer's limit, minus one
        ReadOnlyBufferException - If this buffer is read-only

      • getInt

        int getInt()
        Relative get method for reading an int value.

        Reads the next four bytes at this buffer's current position, composing them into an int value according to the current byte order, and then increments the position by four.

        Returns:
        The int value at the buffer's current position
        Throws:
        BufferUnderflowException - If there are fewer than four bytes remaining in this buffer

      • putInt

        Buffer putInt​(int value)
        Relative put method for writing an int value  (optional operation).

        Writes four bytes containing the given int value, in the current byte order, into this buffer at the current position, and then increments the position by four.

        Parameters:
        value - The int value to be written
        Returns:
        This buffer
        Throws:
        BufferOverflowException - If there are fewer than four bytes remaining in this buffer
        ReadOnlyBufferException - If this buffer is read-only

      • getInt

        int getInt​(int index)
        Absolute get method for reading an int value.

        Reads four bytes at the given index, composing them into a int value according to the current byte order.

        Parameters:
        index - The index from which the bytes will be read
        Returns:
        The int value at the given index
        Throws:
        IndexOutOfBoundsException - If index is negative or not smaller than the buffer's limit, minus three

      • putInt

        Buffer putInt​(int index,
              int value)
        Absolute put method for writing an int value  (optional operation).

        Writes four bytes containing the given int value, in the current byte order, into this buffer at the given index.

        Parameters:
        index - The index at which the bytes will be written
        value - The int value to be written
        Returns:
        This buffer
        Throws:
        IndexOutOfBoundsException - If index is negative or not smaller than the buffer's limit, minus three
        ReadOnlyBufferException - If this buffer is read-only

      • getLong

        long getLong()
        Relative get method for reading a long value.

        Reads the next eight bytes at this buffer's current position, composing them into a long value according to the current byte order, and then increments the position by eight.

        Returns:
        The long value at the buffer's current position
        Throws:
        BufferUnderflowException - If there are fewer than eight bytes remaining in this buffer

      • putLong

        Buffer putLong​(long value)
        Relative put method for writing a long value  (optional operation).

        Writes eight bytes containing the given long value, in the current byte order, into this buffer at the current position, and then increments the position by eight.

        Parameters:
        value - The long value to be written
        Returns:
        This buffer
        Throws:
        BufferOverflowException - If there are fewer than eight bytes remaining in this buffer
        ReadOnlyBufferException - If this buffer is read-only

      • getLong

        long getLong​(int index)
        Absolute get method for reading a long value.

        Reads eight bytes at the given index, composing them into a long value according to the current byte order.

        Parameters:
        index - The index from which the bytes will be read
        Returns:
        The long value at the given index
        Throws:
        IndexOutOfBoundsException - If index is negative or not smaller than the buffer's limit, minus seven

      • putLong

        Buffer putLong​(int index,
               long value)
        Absolute put method for writing a long value  (optional operation).

        Writes eight bytes containing the given long value, in the current byte order, into this buffer at the given index.

        Parameters:
        index - The index at which the bytes will be written
        value - The long value to be written
        Returns:
        This buffer
        Throws:
        IndexOutOfBoundsException - If index is negative or not smaller than the buffer's limit, minus seven
        ReadOnlyBufferException - If this buffer is read-only

      • getFloat

        float getFloat()
        Relative get method for reading a float value.

        Reads the next four bytes at this buffer's current position, composing them into a float value according to the current byte order, and then increments the position by four.

        Returns:
        The float value at the buffer's current position
        Throws:
        BufferUnderflowException - If there are fewer than four bytes remaining in this buffer

      • putFloat

        Buffer putFloat​(float value)
        Relative put method for writing a float value  (optional operation).

        Writes four bytes containing the given float value, in the current byte order, into this buffer at the current position, and then increments the position by four.

        Parameters:
        value - The float value to be written
        Returns:
        This buffer
        Throws:
        BufferOverflowException - If there are fewer than four bytes remaining in this buffer
        ReadOnlyBufferException - If this buffer is read-only

      • getFloat

        float getFloat​(int index)
        Absolute get method for reading a float value.

        Reads four bytes at the given index, composing them into a float value according to the current byte order.

        Parameters:
        index - The index from which the bytes will be read
        Returns:
        The float value at the given index
        Throws:
        IndexOutOfBoundsException - If index is negative or not smaller than the buffer's limit, minus three

      • putFloat

        Buffer putFloat​(int index,
                float value)
        Absolute put method for writing a float value  (optional operation).

        Writes four bytes containing the given float value, in the current byte order, into this buffer at the given index.

        Parameters:
        index - The index at which the bytes will be written
        value - The float value to be written
        Returns:
        This buffer
        Throws:
        IndexOutOfBoundsException - If index is negative or not smaller than the buffer's limit, minus three
        ReadOnlyBufferException - If this buffer is read-only

      • getDouble

        double getDouble()
        Relative get method for reading a double value.

        Reads the next eight bytes at this buffer's current position, composing them into a double value according to the current byte order, and then increments the position by eight.

        Returns:
        The double value at the buffer's current position
        Throws:
        BufferUnderflowException - If there are fewer than eight bytes remaining in this buffer

      • putDouble

        Buffer putDouble​(double value)
        Relative put method for writing a double value  (optional operation).

        Writes eight bytes containing the given double value, in the current byte order, into this buffer at the current position, and then increments the position by eight.

        Parameters:
        value - The double value to be written
        Returns:
        This buffer
        Throws:
        BufferOverflowException - If there are fewer than eight bytes remaining in this buffer
        ReadOnlyBufferException - If this buffer is read-only

      • getDouble

        double getDouble​(int index)
        Absolute get method for reading a double value.

        Reads eight bytes at the given index, composing them into a double value according to the current byte order.

        Parameters:
        index - The index from which the bytes will be read
        Returns:
        The double value at the given index
        Throws:
        IndexOutOfBoundsException - If index is negative or not smaller than the buffer's limit, minus seven

      • putDouble

        Buffer putDouble​(int index,
                 double value)
        Absolute put method for writing a double value  (optional operation).

        Writes eight bytes containing the given double value, in the current byte order, into this buffer at the given index.

        Parameters:
        index - The index at which the bytes will be written
        value - The double value to be written
        Returns:
        This buffer
        Throws:
        IndexOutOfBoundsException - If index is negative or not smaller than the buffer's limit, minus seven
        ReadOnlyBufferException - If this buffer is read-only

      • toStringContent

        String toStringContent​(Charset charset,
                       int position,
                       int limit)
        Returns Buffer's chunk content as String
        Parameters:
        charset - the Charset, which will be use for byte[] -> String transformation.
        position - the first byte offset in the Buffer (inclusive)
        limit - the last byte offset in the Buffer (exclusive)
        Returns:
        String representation of part of this Buffer.

      • dumpHex

        void dumpHex​(Appendable appendable)
        Generate a hex dump of this Buffer's content.
        Parameters:
        appendable - the Appendable to dump this Buffer's content to.
        Since:
        2.3.23

      • toByteBuffer

        ByteBuffer toByteBuffer()

        Converts this Buffer to a ByteBuffer. If this Buffer is not composite - then returned ByteBuffer's content is a shared subsequence of this buffer's content, with CompositeBuffer this is not guaranteed. The position of the returned ByteBuffer is not guaranteed to be 0, the capacity of the returned ByteBuffer is not guaranteed to be equal to the capacity of this Buffer. It is guaranteed that the result of the returned ByteBuffer's Buffer.remaining() call will be equal to this Buffer's remaining() call. The Buffer's and ByteBuffer's position, limit, and mark values are not guaranteed to be independent, so it's recommended to save and restore position, limit values if it is planned to change them or ByteBuffer.slice() the returned ByteBuffer.

        Returns:
        this Buffer as a ByteBuffer.

      • toByteBuffer

        ByteBuffer toByteBuffer​(int position,
                        int limit)

        Converts this Buffer to a ByteBuffer. If this Buffer is not composite - then returned ByteBuffer's content is a shared subsequence of this buffer's content, with CompositeBuffer this is not guaranteed. The position of the returned ByteBuffer is not guaranteed to be 0, the capacity of the returned ByteBuffer is not guaranteed to be equal to the capacity of this Buffer. It is guaranteed that the result of the returned ByteBuffer's Buffer.remaining() call will be equal (limit - position). The Buffer's and ByteBuffer's position, limit, and mark values are not guaranteed to be independent, so it's recommended to save and restore position, limit values if it is planned to change them or ByteBuffer.slice() the returned ByteBuffer.

        Parameters:
        position - the position for the starting subsequence for the returned ByteBuffer.
        limit - the limit for the ending of the subsequence of the returned ByteBuffer.
        Returns:
        this Buffer as a ByteBuffer.

      • toBufferArray

        BufferArray toBufferArray()

        Returns a new BufferArray instance with this Buffer added as an element to the BufferArray. It is guaranteed that returned array's Buffer elements' content is a shared subsequence of this buffer's content no matter if it's a CompositeBuffer or not.

        Returns:
        Returns a new BufferArray instance with this Buffer added as an element to the BufferArray.

      • toBufferArray

        BufferArray toBufferArray​(BufferArray array)

        Returns the specified BufferArray after adding this Buffer. It is guaranteed that returned array's Buffer elements' content is a shared subsequence of this buffer's content no matter if it's a CompositeBuffer or not.

        Parameters:
        array - the base array to append to
        Returns:
        Returns the specified BufferArray after adding this Buffer.

      • toBufferArray

        BufferArray toBufferArray​(int position,
                          int limit)

        Updates this Buffer's position and limit and adds it to a new BufferArray instance. It is guaranteed that returned array's Buffer elements' content is a shared subsequence of this buffer's content no matter if it's a CompositeBuffer or not.

        Parameters:
        position - the new position for this Buffer
        limit - the new limit for this Buffer
        Returns:
        adds this Buffer and returns the specified BufferArray.

      • toBufferArray

        BufferArray toBufferArray​(BufferArray array,
                          int position,
                          int limit)

        Updates this Buffer's position and limit and adds it to the specified BufferArray. It is guaranteed that returned array's Buffer elements' content is a shared subsequence of this buffer's content no matter if it's a CompositeBuffer or not.

        Parameters:
        array - the BufferArray to prepend to
        position - the new position for this Buffer
        limit - the new limit for this Buffer
        Returns:
        adds this Buffer and returns the specified BufferArray.

      • hasArray

        boolean hasArray()
        Tells whether or not this buffer is backed by an accessible byte array. If this method returns true then the array and arrayOffset methods may safely be invoked.
        Returns:
        true if, and only if, this buffer is backed by an array and is not read-only
        Since:
        2.1.12

      • array

        byte[] array()
        Returns the byte array that backs this buffer (optional operation). Modifications to this buffer's content will cause the returned array's content to be modified, and vice versa. Invoke the hasArray method before invoking this method in order to ensure that this buffer has an accessible backing array.
        Returns:
        The array that backs this buffer
        Throws:
        ReadOnlyBufferException - If this buffer is backed by an array but is read-only
        UnsupportedOperationException - If this buffer is not backed by an accessible array
        Since:
        2.1.12

      • arrayOffset

        int arrayOffset()
        Returns the offset within this buffer's backing array of the first element of the buffer (optional operation). If this buffer is backed by an array then buffer position p corresponds to array index p + arrayOffset(). Invoke the hasArray method before invoking this method in order to ensure that this buffer has an accessible backing array.
        Returns:
        The offset within this buffer's array of the first element of the buffer
        Throws:
        ReadOnlyBufferException - If this buffer is backed by an array but is read-only
        UnsupportedOperationException - If this buffer is not backed by an accessible array
        Since:
        2.1.12