String directConnectGatewayId
The ID of the Direct Connect gateway.
String proposalId
The ID of the request proposal.
String associatedGatewayOwnerAccount
The ID of the AWS account that owns the virtual private gateway or transit gateway.
SdkInternalList<T> overrideAllowedPrefixesToDirectConnectGateway
Overrides the Amazon VPC prefixes advertised to the Direct Connect gateway.
For information about how to set the prefixes, see Allowed Prefixes in the AWS Direct Connect User Guide.
DirectConnectGatewayAssociation directConnectGatewayAssociation
String bandwidth
The bandwidth of the connection. The possible values are 50Mbps, 100Mbps, 200Mbps, 300Mbps, 400Mbps, 500Mbps, 1Gbps, 2Gbps, 5Gbps, and 10Gbps. Note that only those AWS Direct Connect Partners who have met specific requirements are allowed to create a 1Gbps, 2Gbps, 5Gbps or 10Gbps hosted connection.
String connectionName
The name of the provisioned connection.
String ownerAccount
The ID of the AWS account of the customer for whom the connection will be provisioned.
String interconnectId
The ID of the interconnect on which the connection will be provisioned.
Integer vlan
The dedicated VLAN provisioned to the connection.
String ownerAccount
The ID of the AWS account that owns the connection.
String connectionId
The ID of the connection.
String connectionName
The name of the connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String region
The AWS Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Integer vlan
The ID of the VLAN.
String partnerName
The name of the AWS Direct Connect service provider associated with the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String awsDeviceV2
The Direct Connect endpoint on which the physical connection terminates.
String hasLogicalRedundancy
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
Any tags assigned to the connection.
String connectionId
The ID of the interconnect or LAG.
String ownerAccount
The ID of the AWS account ID of the customer for the connection.
String bandwidth
The bandwidth of the connection. The possible values are 50Mbps, 100Mbps, 200Mbps, 300Mbps, 400Mbps, 500Mbps, 1Gbps, 2Gbps, 5Gbps, and 10Gbps. Note that only those AWS Direct Connect Partners who have met specific requirements are allowed to create a 1Gbps, 2Gbps, 5Gbps or 10Gbps hosted connection.
String connectionName
The name of the hosted connection.
Integer vlan
The dedicated VLAN provisioned to the hosted connection.
SdkInternalList<T> tags
The tags to assign to the hosted connection.
String ownerAccount
The ID of the AWS account that owns the connection.
String connectionId
The ID of the connection.
String connectionName
The name of the connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String region
The AWS Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Integer vlan
The ID of the VLAN.
String partnerName
The name of the AWS Direct Connect service provider associated with the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String awsDeviceV2
The Direct Connect endpoint on which the physical connection terminates.
String hasLogicalRedundancy
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
Any tags assigned to the connection.
String connectionId
The ID of the connection on which the private virtual interface is provisioned.
String ownerAccount
The ID of the AWS account that owns the virtual private interface.
NewPrivateVirtualInterfaceAllocation newPrivateVirtualInterfaceAllocation
Information about the private virtual interface.
String ownerAccount
The ID of the AWS account that owns the virtual interface.
String virtualInterfaceId
The ID of the virtual interface.
String location
The location of the connection.
String connectionId
The ID of the connection.
String virtualInterfaceType
The type of virtual interface. The possible values are private and public.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network.
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Long amazonSideAsn
The autonomous system number (ASN) for the Amazon side of the connection.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String customerRouterConfig
The customer router configuration.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String virtualGatewayId
The ID of the virtual private gateway. Applies only to private virtual interfaces.
String directConnectGatewayId
The ID of the Direct Connect gateway.
SdkInternalList<T> routeFilterPrefixes
The routes to be advertised to the AWS network in this Region. Applies to public virtual interfaces.
SdkInternalList<T> bgpPeers
The BGP peers configured on this virtual interface.
String region
The AWS Region where the virtual interface is located.
String awsDeviceV2
The Direct Connect endpoint on which the virtual interface terminates.
SdkInternalList<T> tags
Any tags assigned to the virtual interface.
String connectionId
The ID of the connection on which the public virtual interface is provisioned.
String ownerAccount
The ID of the AWS account that owns the public virtual interface.
NewPublicVirtualInterfaceAllocation newPublicVirtualInterfaceAllocation
Information about the public virtual interface.
String ownerAccount
The ID of the AWS account that owns the virtual interface.
String virtualInterfaceId
The ID of the virtual interface.
String location
The location of the connection.
String connectionId
The ID of the connection.
String virtualInterfaceType
The type of virtual interface. The possible values are private and public.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network.
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Long amazonSideAsn
The autonomous system number (ASN) for the Amazon side of the connection.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String customerRouterConfig
The customer router configuration.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String virtualGatewayId
The ID of the virtual private gateway. Applies only to private virtual interfaces.
String directConnectGatewayId
The ID of the Direct Connect gateway.
SdkInternalList<T> routeFilterPrefixes
The routes to be advertised to the AWS network in this Region. Applies to public virtual interfaces.
SdkInternalList<T> bgpPeers
The BGP peers configured on this virtual interface.
String region
The AWS Region where the virtual interface is located.
String awsDeviceV2
The Direct Connect endpoint on which the virtual interface terminates.
SdkInternalList<T> tags
Any tags assigned to the virtual interface.
String connectionId
The ID of the connection on which the transit virtual interface is provisioned.
String ownerAccount
The ID of the AWS account that owns the transit virtual interface.
NewTransitVirtualInterfaceAllocation newTransitVirtualInterfaceAllocation
Information about the transit virtual interface.
VirtualInterface virtualInterface
String ownerAccount
The ID of the AWS account that owns the connection.
String connectionId
The ID of the connection.
String connectionName
The name of the connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String region
The AWS Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Integer vlan
The ID of the VLAN.
String partnerName
The name of the AWS Direct Connect service provider associated with the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String awsDeviceV2
The Direct Connect endpoint on which the physical connection terminates.
String hasLogicalRedundancy
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
Any tags assigned to the connection.
String ownerAccount
The ID of the AWS account that owns the connection.
String connectionId
The ID of the connection.
String connectionName
The name of the connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String region
The AWS Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Integer vlan
The ID of the VLAN.
String partnerName
The name of the AWS Direct Connect service provider associated with the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String awsDeviceV2
The Direct Connect endpoint on which the physical connection terminates.
String hasLogicalRedundancy
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
Any tags assigned to the connection.
String ownerAccount
The ID of the AWS account that owns the virtual interface.
String virtualInterfaceId
The ID of the virtual interface.
String location
The location of the connection.
String connectionId
The ID of the connection.
String virtualInterfaceType
The type of virtual interface. The possible values are private and public.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network.
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Long amazonSideAsn
The autonomous system number (ASN) for the Amazon side of the connection.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String customerRouterConfig
The customer router configuration.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String virtualGatewayId
The ID of the virtual private gateway. Applies only to private virtual interfaces.
String directConnectGatewayId
The ID of the Direct Connect gateway.
SdkInternalList<T> routeFilterPrefixes
The routes to be advertised to the AWS network in this Region. Applies to public virtual interfaces.
SdkInternalList<T> bgpPeers
The BGP peers configured on this virtual interface.
String region
The AWS Region where the virtual interface is located.
String awsDeviceV2
The Direct Connect endpoint on which the virtual interface terminates.
SdkInternalList<T> tags
Any tags assigned to the virtual interface.
String bgpPeerId
The ID of the BGP peer.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String addressFamily
The address family for the BGP peer.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String bgpPeerState
The state of the BGP peer. The following are the possible values:
verifying: The BGP peering addresses or ASN require validation before the BGP peer can be created.
This state applies only to public virtual interfaces.
pending: The BGP peer is created, and remains in this state until it is ready to be established.
available: The BGP peer is ready to be established.
deleting: The BGP peer is being deleted.
deleted: The BGP peer is deleted and cannot be established.
String bgpStatus
The status of the BGP peer. The following are the possible values:
up: The BGP peer is established. This state does not indicate the state of the routing function.
Ensure that you are receiving routes over the BGP session.
down: The BGP peer is down.
unknown: The BGP peer status is not available.
String awsDeviceV2
The Direct Connect endpoint on which the BGP peer terminates.
String connectionId
The ID of the hosted connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String virtualInterfaceId
The ID of the virtual interface.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String ownerAccount
The ID of the AWS account that owns the connection.
String connectionId
The ID of the connection.
String connectionName
The name of the connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String region
The AWS Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Integer vlan
The ID of the VLAN.
String partnerName
The name of the AWS Direct Connect service provider associated with the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String awsDeviceV2
The Direct Connect endpoint on which the physical connection terminates.
String hasLogicalRedundancy
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
Any tags assigned to the connection.
String virtualInterfaceId
The ID of the virtual interface.
NewBGPPeer newBGPPeer
Information about the BGP peer.
VirtualInterface virtualInterface
The virtual interface.
String ownerAccount
The ID of the AWS account that owns the connection.
String connectionId
The ID of the connection.
String connectionName
The name of the connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String region
The AWS Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Integer vlan
The ID of the VLAN.
String partnerName
The name of the AWS Direct Connect service provider associated with the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String awsDeviceV2
The Direct Connect endpoint on which the physical connection terminates.
String hasLogicalRedundancy
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
Any tags assigned to the connection.
String directConnectGatewayId
The ID of the Direct Connect gateway.
String directConnectGatewayOwnerAccount
The ID of the AWS account that owns the Direct Connect gateway.
String gatewayId
The ID of the virtual private gateway or transit gateway.
SdkInternalList<T> addAllowedPrefixesToDirectConnectGateway
The Amazon VPC prefixes to advertise to the Direct Connect gateway.
SdkInternalList<T> removeAllowedPrefixesToDirectConnectGateway
The Amazon VPC prefixes to no longer advertise to the Direct Connect gateway.
DirectConnectGatewayAssociationProposal directConnectGatewayAssociationProposal
Information about the Direct Connect gateway proposal.
String directConnectGatewayId
The ID of the Direct Connect gateway.
String gatewayId
The ID of the virtual private gateway or transit gateway.
SdkInternalList<T> addAllowedPrefixesToDirectConnectGateway
The Amazon VPC prefixes to advertise to the Direct Connect gateway
For information about how to set the prefixes, see Allowed Prefixes in the AWS Direct Connect User Guide.
String virtualGatewayId
The ID of the virtual private gateway.
DirectConnectGatewayAssociation directConnectGatewayAssociation
The association to be created.
String directConnectGatewayName
The name of the Direct Connect gateway.
Long amazonSideAsn
The autonomous system number (ASN) for Border Gateway Protocol (BGP) to be configured on the Amazon side of the connection. The ASN must be in the private range of 64,512 to 65,534 or 4,200,000,000 to 4,294,967,294. The default is 64512.
DirectConnectGateway directConnectGateway
The Direct Connect gateway.
String interconnectName
The name of the interconnect.
String bandwidth
The port bandwidth, in Gbps. The possible values are 1 and 10.
String location
The location of the interconnect.
String lagId
The ID of the LAG.
SdkInternalList<T> tags
The tags to assign to the interconnect,
String interconnectId
The ID of the interconnect.
String interconnectName
The name of the interconnect.
String interconnectState
The state of the interconnect. The following are the possible values:
requested: The initial state of an interconnect. The interconnect stays in the requested state until
the Letter of Authorization (LOA) is sent to the customer.
pending: The interconnect is approved, and is being initialized.
available: The network link is up, and the interconnect is ready for use.
down: The network link is down.
deleting: The interconnect is being deleted.
deleted: The interconnect is deleted.
unknown: The state of the interconnect is not available.
String region
The AWS Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String awsDeviceV2
The Direct Connect endpoint on which the physical connection terminates.
String hasLogicalRedundancy
Indicates whether the interconnect supports a secondary BGP in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
Any tags assigned to the interconnect.
Integer numberOfConnections
The number of physical connections initially provisioned and bundled by the LAG.
String location
The location for the LAG.
String connectionsBandwidth
The bandwidth of the individual physical connections bundled by the LAG. The possible values are 50Mbps, 100Mbps, 200Mbps, 300Mbps, 400Mbps, 500Mbps, 1Gbps, 2Gbps, 5Gbps, and 10Gbps.
String lagName
The name of the LAG.
String connectionId
The ID of an existing connection to migrate to the LAG.
SdkInternalList<T> tags
The tags to assign to the link aggregation group (LAG).
SdkInternalList<T> childConnectionTags
The tags to assign to the child connections of the LAG. Only newly created child connections as the result of creating a LAG connection are assigned the provided tags. The tags are not assigned to an existing connection that is provided via the “connectionId” parameter that will be migrated to the LAG.
String connectionsBandwidth
The individual bandwidth of the physical connections bundled by the LAG. The possible values are 1Gbps and 10Gbps.
Integer numberOfConnections
The number of physical connections bundled by the LAG, up to a maximum of 10.
String lagId
The ID of the LAG.
String ownerAccount
The ID of the AWS account that owns the LAG.
String lagName
The name of the LAG.
String lagState
The state of the LAG. The following are the possible values:
requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of
Authorization (LOA) is available.
pending: The LAG has been approved and is being initialized.
available: The network link is established and the LAG is ready for use.
down: The network link is down.
deleting: The LAG is being deleted.
deleted: The LAG is deleted.
unknown: The state of the LAG is not available.
String location
The location of the LAG.
String region
The AWS Region where the connection is located.
Integer minimumLinks
The minimum number of physical connections that must be operational for the LAG itself to be operational.
String awsDevice
The AWS Direct Connect endpoint that hosts the LAG.
String awsDeviceV2
The AWS Direct Connect endpoint that hosts the LAG.
SdkInternalList<T> connections
The connections bundled by the LAG.
Boolean allowsHostedConnections
Indicates whether the LAG can host other connections.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String hasLogicalRedundancy
Indicates whether the LAG supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
Any tags assigned to link aggregation group (LAG).
String connectionId
The ID of the connection.
NewPrivateVirtualInterface newPrivateVirtualInterface
Information about the private virtual interface.
String ownerAccount
The ID of the AWS account that owns the virtual interface.
String virtualInterfaceId
The ID of the virtual interface.
String location
The location of the connection.
String connectionId
The ID of the connection.
String virtualInterfaceType
The type of virtual interface. The possible values are private and public.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network.
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Long amazonSideAsn
The autonomous system number (ASN) for the Amazon side of the connection.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String customerRouterConfig
The customer router configuration.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String virtualGatewayId
The ID of the virtual private gateway. Applies only to private virtual interfaces.
String directConnectGatewayId
The ID of the Direct Connect gateway.
SdkInternalList<T> routeFilterPrefixes
The routes to be advertised to the AWS network in this Region. Applies to public virtual interfaces.
SdkInternalList<T> bgpPeers
The BGP peers configured on this virtual interface.
String region
The AWS Region where the virtual interface is located.
String awsDeviceV2
The Direct Connect endpoint on which the virtual interface terminates.
SdkInternalList<T> tags
Any tags assigned to the virtual interface.
String connectionId
The ID of the connection.
NewPublicVirtualInterface newPublicVirtualInterface
Information about the public virtual interface.
String ownerAccount
The ID of the AWS account that owns the virtual interface.
String virtualInterfaceId
The ID of the virtual interface.
String location
The location of the connection.
String connectionId
The ID of the connection.
String virtualInterfaceType
The type of virtual interface. The possible values are private and public.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network.
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Long amazonSideAsn
The autonomous system number (ASN) for the Amazon side of the connection.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String customerRouterConfig
The customer router configuration.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String virtualGatewayId
The ID of the virtual private gateway. Applies only to private virtual interfaces.
String directConnectGatewayId
The ID of the Direct Connect gateway.
SdkInternalList<T> routeFilterPrefixes
The routes to be advertised to the AWS network in this Region. Applies to public virtual interfaces.
SdkInternalList<T> bgpPeers
The BGP peers configured on this virtual interface.
String region
The AWS Region where the virtual interface is located.
String awsDeviceV2
The Direct Connect endpoint on which the virtual interface terminates.
SdkInternalList<T> tags
Any tags assigned to the virtual interface.
String connectionId
The ID of the connection.
NewTransitVirtualInterface newTransitVirtualInterface
Information about the transit virtual interface.
VirtualInterface virtualInterface
String virtualInterfaceId
The ID of the virtual interface.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
String customerAddress
The IP address assigned to the customer interface.
String bgpPeerId
The ID of the BGP peer.
VirtualInterface virtualInterface
The virtual interface.
String connectionId
The ID of the connection.
String ownerAccount
The ID of the AWS account that owns the connection.
String connectionId
The ID of the connection.
String connectionName
The name of the connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String region
The AWS Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Integer vlan
The ID of the VLAN.
String partnerName
The name of the AWS Direct Connect service provider associated with the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String awsDeviceV2
The Direct Connect endpoint on which the physical connection terminates.
String hasLogicalRedundancy
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
Any tags assigned to the connection.
String proposalId
The ID of the proposal.
DirectConnectGatewayAssociationProposal directConnectGatewayAssociationProposal
The ID of the associated gateway.
DirectConnectGatewayAssociation directConnectGatewayAssociation
Information about the deleted association.
String directConnectGatewayId
The ID of the Direct Connect gateway.
DirectConnectGateway directConnectGateway
The Direct Connect gateway.
String interconnectId
The ID of the interconnect.
String interconnectState
The state of the interconnect. The following are the possible values:
requested: The initial state of an interconnect. The interconnect stays in the requested state until
the Letter of Authorization (LOA) is sent to the customer.
pending: The interconnect is approved, and is being initialized.
available: The network link is up, and the interconnect is ready for use.
down: The network link is down.
deleting: The interconnect is being deleted.
deleted: The interconnect is deleted.
unknown: The state of the interconnect is not available.
String lagId
The ID of the LAG.
String connectionsBandwidth
The individual bandwidth of the physical connections bundled by the LAG. The possible values are 1Gbps and 10Gbps.
Integer numberOfConnections
The number of physical connections bundled by the LAG, up to a maximum of 10.
String lagId
The ID of the LAG.
String ownerAccount
The ID of the AWS account that owns the LAG.
String lagName
The name of the LAG.
String lagState
The state of the LAG. The following are the possible values:
requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of
Authorization (LOA) is available.
pending: The LAG has been approved and is being initialized.
available: The network link is established and the LAG is ready for use.
down: The network link is down.
deleting: The LAG is being deleted.
deleted: The LAG is deleted.
unknown: The state of the LAG is not available.
String location
The location of the LAG.
String region
The AWS Region where the connection is located.
Integer minimumLinks
The minimum number of physical connections that must be operational for the LAG itself to be operational.
String awsDevice
The AWS Direct Connect endpoint that hosts the LAG.
String awsDeviceV2
The AWS Direct Connect endpoint that hosts the LAG.
SdkInternalList<T> connections
The connections bundled by the LAG.
Boolean allowsHostedConnections
Indicates whether the LAG can host other connections.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String hasLogicalRedundancy
Indicates whether the LAG supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
Any tags assigned to link aggregation group (LAG).
String virtualInterfaceId
The ID of the virtual interface.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String connectionId
The ID of the connection.
String providerName
The name of the APN partner or service provider who establishes connectivity on your behalf. If you specify this parameter, the LOA-CFA lists the provider name alongside your company name as the requester of the cross connect.
String loaContentType
The standard media type for the LOA-CFA document. The only supported value is application/pdf.
Loa loa
The Letter of Authorization - Connecting Facility Assignment (LOA-CFA).
String interconnectId
The ID of the interconnect.
SdkInternalList<T> connections
The connections.
String connectionId
The ID of the connection.
SdkInternalList<T> connections
The connections.
String directConnectGatewayId
The ID of the Direct Connect gateway.
String proposalId
The ID of the proposal.
String associatedGatewayId
The ID of the associated gateway.
Integer maxResults
The maximum number of results to return with a single call. To retrieve the remaining results, make another call
with the returned nextToken value.
If MaxResults is given a value larger than 100, only 100 results are returned.
String nextToken
The token for the next page of results.
SdkInternalList<T> directConnectGatewayAssociationProposals
Describes the Direct Connect gateway association proposals.
String nextToken
The token to use to retrieve the next page of results. This value is null when there are no more
results to return.
String associationId
The ID of the Direct Connect gateway association.
String associatedGatewayId
The ID of the associated gateway.
String directConnectGatewayId
The ID of the Direct Connect gateway.
Integer maxResults
The maximum number of results to return with a single call. To retrieve the remaining results, make another call
with the returned nextToken value.
If MaxResults is given a value larger than 100, only 100 results are returned.
String nextToken
The token provided in the previous call to retrieve the next page.
String virtualGatewayId
The ID of the virtual private gateway.
SdkInternalList<T> directConnectGatewayAssociations
Information about the associations.
String nextToken
The token to retrieve the next page.
String directConnectGatewayId
The ID of the Direct Connect gateway.
String virtualInterfaceId
The ID of the virtual interface.
Integer maxResults
The maximum number of results to return with a single call. To retrieve the remaining results, make another call
with the returned nextToken value.
If MaxResults is given a value larger than 100, only 100 results are returned.
String nextToken
The token provided in the previous call to retrieve the next page.
SdkInternalList<T> directConnectGatewayAttachments
The attachments.
String nextToken
The token to retrieve the next page.
String directConnectGatewayId
The ID of the Direct Connect gateway.
Integer maxResults
The maximum number of results to return with a single call. To retrieve the remaining results, make another call
with the returned nextToken value.
If MaxResults is given a value larger than 100, only 100 results are returned.
String nextToken
The token provided in the previous call to retrieve the next page.
SdkInternalList<T> directConnectGateways
The Direct Connect gateways.
String nextToken
The token to retrieve the next page.
String connectionId
The ID of the interconnect or LAG.
SdkInternalList<T> connections
The connections.
String interconnectId
The ID of the interconnect.
String providerName
The name of the service provider who establishes connectivity on your behalf. If you supply this parameter, the LOA-CFA lists the provider name alongside your company name as the requester of the cross connect.
String loaContentType
The standard media type for the LOA-CFA document. The only supported value is application/pdf.
Loa loa
The Letter of Authorization - Connecting Facility Assignment (LOA-CFA).
String interconnectId
The ID of the interconnect.
SdkInternalList<T> interconnects
The interconnects.
String lagId
The ID of the LAG.
SdkInternalList<T> lags
The LAGs.
String connectionId
The ID of a connection, LAG, or interconnect.
String providerName
The name of the service provider who establishes connectivity on your behalf. If you specify this parameter, the LOA-CFA lists the provider name alongside your company name as the requester of the cross connect.
String loaContentType
The standard media type for the LOA-CFA document. The only supported value is application/pdf.
ByteBuffer loaContent
The binary contents of the LOA-CFA document.
String loaContentType
The standard media type for the LOA-CFA document. The only supported value is application/pdf.
SdkInternalList<T> locations
The locations.
SdkInternalList<T> resourceArns
The Amazon Resource Names (ARNs) of the resources.
SdkInternalList<T> resourceTags
Information about the tags.
SdkInternalList<T> virtualGateways
The virtual private gateways.
SdkInternalList<T> virtualInterfaces
The virtual interfaces
String directConnectGatewayId
The ID of the Direct Connect gateway.
String directConnectGatewayName
The name of the Direct Connect gateway.
Long amazonSideAsn
The autonomous system number (ASN) for the Amazon side of the connection.
String ownerAccount
The ID of the AWS account that owns the Direct Connect gateway.
String directConnectGatewayState
The state of the Direct Connect gateway. The following are the possible values:
pending: The initial state after calling CreateDirectConnectGateway.
available: The Direct Connect gateway is ready for use.
deleting: The initial state after calling DeleteDirectConnectGateway.
deleted: The Direct Connect gateway is deleted and cannot pass traffic.
String stateChangeError
The error message if the state of an object failed to advance.
String directConnectGatewayId
The ID of the Direct Connect gateway.
String directConnectGatewayOwnerAccount
The ID of the AWS account that owns the associated gateway.
String associationState
The state of the association. The following are the possible values:
associating: The initial state after calling CreateDirectConnectGatewayAssociation.
associated: The Direct Connect gateway and virtual private gateway or transit gateway are
successfully associated and ready to pass traffic.
disassociating: The initial state after calling DeleteDirectConnectGatewayAssociation.
disassociated: The virtual private gateway or transit gateway is disassociated from the Direct
Connect gateway. Traffic flow between the Direct Connect gateway and virtual private gateway or transit gateway
is stopped.
String stateChangeError
The error message if the state of an object failed to advance.
AssociatedGateway associatedGateway
Information about the associated gateway.
String associationId
The ID of the Direct Connect gateway association.
SdkInternalList<T> allowedPrefixesToDirectConnectGateway
The Amazon VPC prefixes to advertise to the Direct Connect gateway.
String virtualGatewayId
The ID of the virtual private gateway. Applies only to private virtual interfaces.
String virtualGatewayRegion
The AWS Region where the virtual private gateway is located.
String virtualGatewayOwnerAccount
The ID of the AWS account that owns the virtual private gateway.
String proposalId
The ID of the association proposal.
String directConnectGatewayId
The ID of the Direct Connect gateway.
String directConnectGatewayOwnerAccount
The ID of the AWS account that owns the Direct Connect gateway.
String proposalState
The state of the proposal. The following are possible values:
accepted: The proposal has been accepted. The Direct Connect gateway association is available to use
in this state.
deleted: The proposal has been deleted by the owner that made the proposal. The Direct Connect
gateway association cannot be used in this state.
requested: The proposal has been requested. The Direct Connect gateway association cannot be used in
this state.
AssociatedGateway associatedGateway
Information about the associated gateway.
SdkInternalList<T> existingAllowedPrefixesToDirectConnectGateway
The existing Amazon VPC prefixes advertised to the Direct Connect gateway.
SdkInternalList<T> requestedAllowedPrefixesToDirectConnectGateway
The Amazon VPC prefixes to advertise to the Direct Connect gateway.
String directConnectGatewayId
The ID of the Direct Connect gateway.
String virtualInterfaceId
The ID of the virtual interface.
String virtualInterfaceRegion
The AWS Region where the virtual interface is located.
String virtualInterfaceOwnerAccount
The ID of the AWS account that owns the virtual interface.
String attachmentState
The state of the attachment. The following are the possible values:
attaching: The initial state after a virtual interface is created using the Direct Connect gateway.
attached: The Direct Connect gateway and virtual interface are attached and ready to pass traffic.
detaching: The initial state after calling DeleteVirtualInterface.
detached: The virtual interface is detached from the Direct Connect gateway. Traffic flow between
the Direct Connect gateway and virtual interface is stopped.
String attachmentType
The interface type.
String stateChangeError
The error message if the state of an object failed to advance.
String ownerAccount
The ID of the AWS account that owns the connection.
String connectionId
The ID of the connection.
String connectionName
The name of the connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String region
The AWS Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Integer vlan
The ID of the VLAN.
String partnerName
The name of the AWS Direct Connect service provider associated with the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String awsDeviceV2
The Direct Connect endpoint on which the physical connection terminates.
String hasLogicalRedundancy
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
Any tags assigned to the connection.
String interconnectId
The ID of the interconnect.
String interconnectName
The name of the interconnect.
String interconnectState
The state of the interconnect. The following are the possible values:
requested: The initial state of an interconnect. The interconnect stays in the requested state until
the Letter of Authorization (LOA) is sent to the customer.
pending: The interconnect is approved, and is being initialized.
available: The network link is up, and the interconnect is ready for use.
down: The network link is down.
deleting: The interconnect is being deleted.
deleted: The interconnect is deleted.
unknown: The state of the interconnect is not available.
String region
The AWS Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String awsDeviceV2
The Direct Connect endpoint on which the physical connection terminates.
String hasLogicalRedundancy
Indicates whether the interconnect supports a secondary BGP in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
Any tags assigned to the interconnect.
String connectionsBandwidth
The individual bandwidth of the physical connections bundled by the LAG. The possible values are 1Gbps and 10Gbps.
Integer numberOfConnections
The number of physical connections bundled by the LAG, up to a maximum of 10.
String lagId
The ID of the LAG.
String ownerAccount
The ID of the AWS account that owns the LAG.
String lagName
The name of the LAG.
String lagState
The state of the LAG. The following are the possible values:
requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of
Authorization (LOA) is available.
pending: The LAG has been approved and is being initialized.
available: The network link is established and the LAG is ready for use.
down: The network link is down.
deleting: The LAG is being deleted.
deleted: The LAG is deleted.
unknown: The state of the LAG is not available.
String location
The location of the LAG.
String region
The AWS Region where the connection is located.
Integer minimumLinks
The minimum number of physical connections that must be operational for the LAG itself to be operational.
String awsDevice
The AWS Direct Connect endpoint that hosts the LAG.
String awsDeviceV2
The AWS Direct Connect endpoint that hosts the LAG.
SdkInternalList<T> connections
The connections bundled by the LAG.
Boolean allowsHostedConnections
Indicates whether the LAG can host other connections.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String hasLogicalRedundancy
Indicates whether the LAG supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
Any tags assigned to link aggregation group (LAG).
ByteBuffer loaContent
The binary contents of the LOA-CFA document.
String loaContentType
The standard media type for the LOA-CFA document. The only supported value is application/pdf.
String locationCode
The code for the location.
String locationName
The name of the location. This includes the name of the colocation partner and the physical site of the building.
String region
The AWS Region for the location.
SdkInternalList<T> availablePortSpeeds
The available port speeds for the location.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String addressFamily
The address family for the BGP peer.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network.
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
String virtualGatewayId
The ID of the virtual private gateway.
String directConnectGatewayId
The ID of the Direct Connect gateway.
SdkInternalList<T> tags
Any tags assigned to the private virtual interface.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network.
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String addressFamily
The address family for the BGP peer.
String customerAddress
The IP address assigned to the customer interface.
SdkInternalList<T> tags
Any tags assigned to the private virtual interface to be provisioned on a connection.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network.
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
SdkInternalList<T> routeFilterPrefixes
The routes to be advertised to the AWS network in this Region. Applies to public virtual interfaces.
SdkInternalList<T> tags
Any tags assigned to the public virtual interface.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network.
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
SdkInternalList<T> routeFilterPrefixes
The routes to be advertised to the AWS network in this Region. Applies to public virtual interfaces.
SdkInternalList<T> tags
Any tags assigned to the public virtual interface to be provisioned on a connection.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network.
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 8500. The default value is 1500.
String authKey
The authentication key for BGP configuration.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
String directConnectGatewayId
The ID of the Direct Connect gateway.
SdkInternalList<T> tags
Any tags assigned to the transit virtual interface.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network.
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 8500. The default value is 1500.
String authKey
The authentication key for BGP configuration.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
SdkInternalList<T> tags
Any tags assigned to the transit virtual interface.
String resourceArn
The Amazon Resource Name (ARN) of the resource.
SdkInternalList<T> tags
The tags.
String cidr
The CIDR block for the advertised route. Separate multiple routes using commas. An IPv6 CIDR must use /64 or shorter.
String resourceArn
The Amazon Resource Name (ARN) of the resource.
SdkInternalList<T> tags
The tags to assign.
String resourceArn
The Amazon Resource Name (ARN) of the resource.
SdkInternalList<T> tagKeys
The tag keys of the tags to remove.
String associationId
The ID of the Direct Connect gateway association.
SdkInternalList<T> addAllowedPrefixesToDirectConnectGateway
The Amazon VPC prefixes to advertise to the Direct Connect gateway.
SdkInternalList<T> removeAllowedPrefixesToDirectConnectGateway
The Amazon VPC prefixes to no longer advertise to the Direct Connect gateway.
DirectConnectGatewayAssociation directConnectGatewayAssociation
String connectionsBandwidth
The individual bandwidth of the physical connections bundled by the LAG. The possible values are 1Gbps and 10Gbps.
Integer numberOfConnections
The number of physical connections bundled by the LAG, up to a maximum of 10.
String lagId
The ID of the LAG.
String ownerAccount
The ID of the AWS account that owns the LAG.
String lagName
The name of the LAG.
String lagState
The state of the LAG. The following are the possible values:
requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of
Authorization (LOA) is available.
pending: The LAG has been approved and is being initialized.
available: The network link is established and the LAG is ready for use.
down: The network link is down.
deleting: The LAG is being deleted.
deleted: The LAG is deleted.
unknown: The state of the LAG is not available.
String location
The location of the LAG.
String region
The AWS Region where the connection is located.
Integer minimumLinks
The minimum number of physical connections that must be operational for the LAG itself to be operational.
String awsDevice
The AWS Direct Connect endpoint that hosts the LAG.
String awsDeviceV2
The AWS Direct Connect endpoint that hosts the LAG.
SdkInternalList<T> connections
The connections bundled by the LAG.
Boolean allowsHostedConnections
Indicates whether the LAG can host other connections.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String hasLogicalRedundancy
Indicates whether the LAG supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
Any tags assigned to link aggregation group (LAG).
String ownerAccount
The ID of the AWS account that owns the virtual interface.
String virtualInterfaceId
The ID of the virtual interface.
String location
The location of the connection.
String connectionId
The ID of the connection.
String virtualInterfaceType
The type of virtual interface. The possible values are private and public.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network.
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Long amazonSideAsn
The autonomous system number (ASN) for the Amazon side of the connection.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String customerRouterConfig
The customer router configuration.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String virtualGatewayId
The ID of the virtual private gateway. Applies only to private virtual interfaces.
String directConnectGatewayId
The ID of the Direct Connect gateway.
SdkInternalList<T> routeFilterPrefixes
The routes to be advertised to the AWS network in this Region. Applies to public virtual interfaces.
SdkInternalList<T> bgpPeers
The BGP peers configured on this virtual interface.
String region
The AWS Region where the virtual interface is located.
String awsDeviceV2
The Direct Connect endpoint on which the virtual interface terminates.
SdkInternalList<T> tags
Any tags assigned to the virtual interface.
String virtualGatewayId
The ID of the virtual private gateway.
String virtualGatewayState
The state of the virtual private gateway. The following are the possible values:
pending: Initial state after creating the virtual private gateway.
available: Ready for use by a private virtual interface.
deleting: Initial state after deleting the virtual private gateway.
deleted: The virtual private gateway is deleted. The private virtual interface is unable to send
traffic over this gateway.
String ownerAccount
The ID of the AWS account that owns the virtual interface.
String virtualInterfaceId
The ID of the virtual interface.
String location
The location of the connection.
String connectionId
The ID of the connection.
String virtualInterfaceType
The type of virtual interface. The possible values are private and public.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network.
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Long amazonSideAsn
The autonomous system number (ASN) for the Amazon side of the connection.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String customerRouterConfig
The customer router configuration.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.
Boolean jumboFrameCapable
Indicates whether jumbo frames (9001 MTU) are supported.
String virtualGatewayId
The ID of the virtual private gateway. Applies only to private virtual interfaces.
String directConnectGatewayId
The ID of the Direct Connect gateway.
SdkInternalList<T> routeFilterPrefixes
The routes to be advertised to the AWS network in this Region. Applies to public virtual interfaces.
SdkInternalList<T> bgpPeers
The BGP peers configured on this virtual interface.
String region
The AWS Region where the virtual interface is located.
String awsDeviceV2
The Direct Connect endpoint on which the virtual interface terminates.
SdkInternalList<T> tags
Any tags assigned to the virtual interface.
Copyright © 2019. All rights reserved.